40ft High Cube Pre-Owned Steel Container
From $1,600 / unit
Maximum volume at the minimum investment —
The 40ft High Cube As-Is container is the single largest container you can buy at the lowest price tier — 304 sq ft of floor space with 9'6" walls, all for $1,600. For skilled builders who treat container rehabilitation as part of the project, this unit offers an unmatched volume-to-cost ratio.
Targeted at owner-builder home projects, multi-vehicle garages, large workshop conversions, and agricultural equipment shelters across the St. Petersburg area. The High Cube height is especially valuable at the 40-foot length — it gives you enough vertical room to build a full residential ceiling with insulation and mechanical systems above, or to install a partial mezzanine level for additional usable space.
Expect the full range of cosmetic and structural wear at this grade: heavy rust, dents, floor wear, and areas that demand welding attention. The Corten steel skeleton is the asset — everything else is your canvas. For builders with fabrication equipment and a realistic repair budget, the 40ft HC As-Is is where the most ambitious container projects in Tampa Bay begin.
Technical Details
~304 sq ft
of usable floor space
9'6" Tall
added headroom for habitable interiors
8,775 lbs
tare weight
Modification Advantages for Building Projects
The 40ft High Cube ranks among the most versatile containers for conversion work. Here is what makes it a preferred starting point for builders and property owners:
- Roughly 304 sq ft of habitable floor area — room for a complete one-bedroom layout including kitchen, bathroom, and lounge
- 8'10" raw interior ceiling — once insulated and framed, you retain about 8' of finished headroom, satisfying typical residential code requirements
- Weathering steel (Corten) shell — self-protecting steel that forms a rust-resistant patina, engineered to endure 25-50+ years along Florida's Gulf Coast
- Works with conventional framing — inner measurements support standard 2x4 stud walls paired with closed-cell foam, so any licensed contractor can handle the job
- Full-width rear doors — keep them for a statement entrance, swap them for floor-to-ceiling glazing, or seal and reframe for additional wall area
- 28mm marine plywood subfloor — delivers a flat, sturdy base ready to accept any final flooring finish
- Modular and stackable — arrange units side-by-side or on two levels to form multi-room or two-story configurations
Did You Know?
Converting a 40ft High Cube typically runs 40-60% below the cost of conventional stick-frame construction for equivalent square footage. Across St. Petersburg, property owners are turning to container-based ADUs (Accessory Dwelling Units) to earn rental income or provide housing for family.
Florida has become increasingly ADU-friendly, with new legislation making it easier to add a container-based dwelling to your property.
Understanding the As-Is Classification
As-Is containers are sold in their current condition without warranties or guarantees. These units have seen extensive service and may show heavy rust, significant dents, floor wear, or small holes. They represent the lowest price point in our inventory.
As-Is containers are best suited for experienced builders who can assess structural condition and make repairs themselves. Common uses include non-critical storage, fencing material, retaining walls, and creative DIY projects where cosmetic condition is irrelevant.
For hands-on renovators with welding and fabrication skills, an As-Is unit offers the most container for the least money. Factor in repair costs when comparing to higher-grade units — sometimes the labor savings of a CW or WWT unit make them a better overall value.
As-Is Grade Includes:
- Steel frame structure
- Corner castings present
- Cargo doors included
- May have cosmetic damage
- Possible rust or dents
- Sold without guarantees
Sold in current condition without guarantees. May have significant cosmetic damage — heavy rust, dents, small holes. Best for experienced builders, fencing, or non-critical storage projects.
Common Build Applications
St. Petersburg owners use the 40ft High Cube for these projects
Compact Dwelling
Complete one-bedroom layout with cooking, bathing, and living zones
Accessory Unit / In-Law Suite
Yard-based living quarters for relatives or rental revenue
Private Home Office
Generous remote-work environment with ample room for desks and equipment
Maker Studio
Steel-enclosed space for carpentry, crafts, or hands-on hobbies
Short-Term Rental
Eye-catching getaway unit with contemporary, photo-ready design
Delivery Information
St. Petersburg & Tampa Bay Delivery
- Typical delivery: 3-7 business days from order confirmation
- Method: Tilt-bed truck — container slides directly onto your prepared site
- Site requirements: Flat, level surface with clearance for an 18-wheel truck to maneuver
- Service area: St. Petersburg, Tampa, Clearwater, Pinellas County, Hillsborough County, Largo, Gulfport, Treasure Island, Pinellas …
- Delivery cost: Varies by distance — included in your free quote
- Scheduling: We coordinate a delivery window that works for you
Free Delivery Quote
Get your total price including delivery to your exact location.
Get Pricing on This Unit
Fill out the form below and we'll get back to you within 1 hour with pricing and delivery details.
Other Units Worth Considering
Frequently paired alternatives for similar builds
20ft Standard
From $950
~150 sq ft. DIY projects, fencing, non-critical storage.
20ft High Cube
From $1,100
~150 sq ft, 9'6" tall. DIY projects, fencing, non-critical storage.
40ft Standard
From $1,350
~304 sq ft. DIY projects, fencing, non-critical storage.
40ft High Cube
From $3,800
~304 sq ft, 9'6" tall. Premium builds, living spaces, showroom quality.